DVDO AVLab TPG Guía de usuario descargar pdf (Pagina 9)

DVDO AVLab TPG - 4K Test Pattern Generator

DVDO AVLab TPG 9 A.04

Controls: buttons and the remote

AVLab TPG has three physical buttons:

• Pattern button manually cycles through the most common patterns and can be used if you do not have the remote or

software control

• Resolution button cycles through four common video resolutions. This is particularly useful if the AVLab TPG is left in a

mode (i.e. 4K) from a previous calibration that the current display does not support. In this case, simply press the

resolution button slowly until you get to the “auto” setting and then use the OSD to correctly set output parameters.

• F/W update (recessed) button: if held down while power is initially applied, AVLab goes into firmware update mode.

See updating firmware section of this manual. If F/W version 1.01 or later, simply pressing the button while connected

via USB to a PC causes AVLab to enter F/W update (mass storage) mode.

F/W

01.01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 75 76

Sin comentarios

DVDO AVLab TPG Guía de usuario Pagina 9