DVDO iScan Guía de usuario descargar pdf (Pagina 9)

DVDO iScan Mini - 4K Scaler / Video Enhancement

DVDO iScan Mini 9

Connections

iScan Mini is normally connected as the last device before the display HDMI input. It is small enough to

be hidden behind an AVR or a wall mounted TV. It should be mounted in such a way as to make the IR

receiver capable of receiving commands from the remote control. If this is not possible, an IR extender

cable

(http://www.monoprice.com/Product?c_id=109&cp_id=10110&cs_id=1011009&p_id=8060&seq=1&fo

rmat=2 ) can be used.

When used as a test pattern generator, no input is required.

Controls: buttons and the remote

iScan Mini has three physical buttons:

 Enhancement button manually cycles through Enhancement presets (Low, High, User1, User2, Off)

o When mode is changed, an on-screen message will indicate the new mode

 Scaling button manually cycles through scaling presets (Auto, DVDO, off)

o When mode is changed, an on-screen message will indicate the new mode

 F/W update button (recessed) – While iScan Mini is connected directly to a PC with a USB cable,

press the F/W update button for 2 seconds to enter firmware update mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Sin comentarios

DVDO iScan Guía de usuario Pagina 9